Silent Knight SK-PULL-SA Addressable Single Action Pull Station, Single Pole, SPST, N/O

Product Overview The SK-PULL-SA is a single action pull station requiring only one motion to activate the station. The SK-PULL-DA is a dual action pull station requiring two motions to active the station. The SK-PULL-SA and SK-PULL-DA are for use with Honeywell Silent Knight Series fire control panel (FACP). Extremely easy to operate, the SK-PULL-DA and SK-PULL-SA provide a fast and practical means of manually initiating a fire alarm signal. The FACP recognizes each manual pull station by its specific address saving precious seconds in determining the location of an alarm. INSTALLATION The SK-PULL-SA and SK-PULL-DA can be surface mounted to an SB-I/O surface back box or semi-flush mounted on a standard single-gang with a minimum depth of 2.13″(5.40 cm) or double gang or 4″ (10.61 cm) square electrical box. You can also use the optional (System Sensor® PN BG-TR) trim ring if the station is being semi-flush mounted. Main Features Installer can open station without causing an alarm condition Dual-color LED is visible through handle of station Key operated test and reset lock using lock plate actuator Key matches compatible FACP locks Meets ADA requirement for 5 lbs maximum pull force to active Meets the Americans with Disabilities Act Accessibility Guidelines (ADAAG) controls and operating mechanisms guidelines (Section 4.1.3[13]) Shell, door, and handle molded from durable LEXAN Reliable analog communications for trouble-free operation Braille text on station handle Rotary address switches for fast installation Show More Show Less